- Order number: 111-1000
Frei Programmierbares Motorsteuergerät für 4 zyl. Motoren.
Eingänge:
- Digitaleingänge: 2
- Analoge Temperatureingänge: 2
- Analoge Spannungseingänge: 3
Ausgänge:
- Hilfsausgangskanäle: 4
- Einspritzdüsen Ausgänge: 4
- Zündkanäle: 4
- +5V Spannungsversorgung für Sensoren
Kommunikation:
- Serieller (RS232) Anschluss
Diverses:
- Data Logging
- Software: PCLink
Software PCLink:
- Schnelles und einfaches Programmieren durch Tastenkommandos
- 600 Seiten "Rechte Maustaste Hilfe"
- Leistungsstarke Logg- Analyse
- Benutzer-Konfigurierbares Layout
* Unbenutzte Zündausgänge können als Hilfskanäle genutzt werden.
Engine Configurations
- 2-12 Cylinder Distributed
- 2-8 Cylinder Wasted Spark
- 2-4 Cylinder Direct Spark
- Odd Fire Engines
- 2-Stroke Engines
- Configurable Firing Order
- Configurable TDC Points (for odd fire)
Fueling Adjustments
- Up to 440 Zone Fuel Table with configurable load and RPM centers. Configurable X and Y Axis Parameters
- Multiple Fuel Tables
- Up to 6D Fuel Mapping
- Injection Rate
- Master Enrichment
- Pre-Crank Prime
- Crank Enrichment
- Post Start Enrichment
- Warm Up Enrichment
- Acceleration Enrichment
- IAT Fuel Correction
- Injector Deadtime Compensation
- Overrun Fuel Cut
- Idle Load Trims
- Fuel Temperature Correction
Ignition Adjustments
- Up to 440 Zone Ignition Table with configurable load and RPM centers. Configurable X and Y Axis Parameters
- Crank Dwell Extension
- Maximum Advance
- AFR Table Correction
- Spark Duration
- Beginning / End Injection Definable
- Dwell Time Table. Configurable X and Y Axis Parameters
- Individual Cylinder Trim
- Individual Cylinder Tables
- Multiple Ignition Tables
- Up to 6D Ignition Mapping
- Individual Cylinder Ignition Trim
- IAT Trim
- Voltage Correction
- ECT Trim
- OEM Compatibility
- CDI Compatibility
Limits
- Engine Temperature Dependent Progressive Limiting
- Vehicle Speed Limit
- System Voltage Limit
- User Configurable RPM Limit based on external input
Triggering
- Digital Trigger Decoding
- Reluctor, Optical Proximity or Hall Sensors
- Programmable filtering and arming thresholds
- Configurable trigger patterns or preset triggering options.
- Supports nearly all OEM trigger patterns and custom trigger arrangements
Motor-Sport Features
- None, use the G4 Storm
Communications
- Serial RS232 via adapter cable available separately
Auxiliary Output Options
- Each Output independently configurable
- Unused ignition outputs available as auxiliary outputs
- General Purpose Output
- General Purpose PWM
- Closed Loop Idle Speed Control (Solenoid only)
- Fuel Pump
- Fuel Pump Speed Control
- Engine Fan
- Air Con Clutch
- Air Con Fan
- Intercooler Spray
- Tacho
- Check Engine Light
- Purge Solenoid
- Oxygen Sensor Heater
- Switched Cam Solenoid
Processing
- 40 MHz Specialised Engine Management Microprocessor
- Ignition control to 0.1 degree, fuel to 0.01 ms
- 32 Bit Calculation
- 10 Bit ADC Resolution
- 20000+ RPM
- 4Mb Non Volatile Flash
Inputs/Output
- 4 High Current Injector Drives
- 4 Ignition Channels
- 4 Auxiliary Outputs
- 2 Digital Inputs
- +5V Out
- 2 Temperature Inputs
- 3 0-5V Analog Inputs
- 2 Trigger Inputs (Reluctor, Optical or Hall Sensors)
- On Board Baro Correction (Real Time)
Analog Inputs
- Each channel independently configurable with preset or custom calibrations
- Wide-band O2 (from external controller e.g. Innovate LC1)
- Boost Adjust Signal
- Configurable Fault Detection Settings
- Voltage (0-5V)
- Pyro (from external controller)
- Throttle Position
- Pressure (general purpose, fuel, oil)
- Air Flow Meter
- MAP (external)
- Temperature (coolant, IAT, general purpose)
- Narrow Band O2
Boost Control
- Engine Temp Correction
- IAT Correction
- Multiple Boost Tables
- External Adjustment
Idle Control
- Reliable and accurate user configurable Closed Loop Control
- Solenoid or Uni-polar 6 terminal stepper only. If 4 wire stepper control is required use the G4+ Storm
- Aircon, Engine Fan or Power Steer idle up
- Open Loop Control Mode for diagnostics
Environment
- Internal Temperature Range -10 - 85oC
- Ambient Temperature Range -30 - 90oC
- Voltage 8 - 22V
- Operating Current 200mA
- Electrical protection on all inputs and outputs
Physical
- Length: 79 mm
- Width: 126 mm
- Height: 42 mm
- Weight: 360 grams
- Connector : 26 Pin Waterproof Automotive
- Adjust ALL parameters in real time
- Mouse or keyboard operation
- Tuning
- QuickTune - automated fuel self tuning
- Logging Analysis
- Diagnostic Information
- Built In Help
- Definable Screen Layouts
- View over 300 possible runtime parameters
Package Contents
- G4+ Atom ECU
- Mounting Bracket
- Wiring and Installation Instructions
- 2 large Link Stickers
- 2 small Link Stickers
Manufacturing Standard
- ISO 13485
Additional Accessories
(Purchased Separately)
- Terminal and plug kit - not recommended unless you have access to the correct AMP crimper
- 400mm loom
- 2.5m loom
- 5m loom (ideal for boat installations)
- 3/8 NPT (Aluminium or Steel Mounting Bosses to suit)
- Bosch push in(Aluminium or Steel Mounting Bosses to suit)
- Throttle Position Sensor
- 3 Channel Link Igniter
- Wideband O2 Controller & Sensor
- Injector Ballast Resistor Packs
- 1 x 1R (6 x <6R injectors)
- 2 x 1R (12 x <6R injectors)
- 4 x 4R7 (4 x <6R injectors)
- 6 x 4R7 (6 x <6R injectors)