Products from Artec®
No results were found for the filter!
Artec® Manifold Blanket for V-band Compact...
The Artec® manifold blanket is designed to isolate the radiant heat generated by the turbocharger. These manifold blankets have been extensively tested in the harshest environments, road racing and on the track. The Artec® manifold...
€297.00
Artec® T4 Twin Wastegate Manifold for Toyota...
The manifold is designed for ALL OEM 2JZ GTE models. They fit GS, SC, IS, Supra and more. They are suitable for both LHD and RHD. Suitable for small turbos like GT30 as well as G35 G40 G42 G45 PTE 5858, 6262 6466 6766 6870 7175 8080 and...
€1,840.70
Artec® turbo Blanket for V-band manifolds...
The Artec® turbo blanket is designed to isolate the radiant heat generated by the turbocharger. These turbo blankets have been extensively tested in the harshest environments, road racing and on the track. The Artec® turbo blanket...
€297.00
Artec® V-Band flange turbine inlet
Artec® V-Band flange turbine inlet stainless steel for the different turbo manufacturer for Garrett for Tial for Precision
€297.00
Artec® V-Band High Mount Manifold Toyota Supra...
The V-Band manifold for your 1JZ VVTi manifold from Artec® has a V-Band flange and a single 44/45/46mm wastegate mount. Designed for high mount assembly, i.e. the turbocharger sits above the manifold. The channels have an inner diameter...
€1,929.50
Artec® V-Band Low Mount Manifold for Nissan SR20
The Artec® Low Mount manifold with V-band allows you to easily mount a large turbocharger. The manifold was designed to keep the pipe diameter as small as possible to improve throttle response and keep exhaust velocity as high as...
€1,497.50
Artec® V-Band Low Mount Manifold for Toyota...
The Artec® Low Mount manifold with V-band allows you to easily mount a large turbocharger. The manifold was designed to keep the pipe diameter as small as possible to improve throttle response and keep exhaust velocity as high as...
€1,633.60
Nissan SR20 V-Band Abgaskrümmer Artec®
The Artec Cast SR20 manifold has been designed to accept a wide variety of turbos that use a 50 to 55mm ID on the inlet flange, These include Precision , Tial, and Garrett. The wastegate has been positioned to allow for easy routing for...
€1,497.50
Toyota 2JZ GTE V-band Compact manifold Artec®
The 2JZ-GTE compact manifold has been designed for guys wanting up to 900hp whilst keep as much response as possible. Very easy access to all the nuts to reduce install time and cursing. All OEM fasteners can be used. This manifold will...
€1,559.90
Viewed